Pipefitter Improver
Company: Disability Solutions
Location: San Diego
Posted on: November 3, 2024
|
|
Job Description:
Job Description A pipefitter Improver is responsible for
removing, repairing, targeting, laying out, fabricating,
installing, and testing marine piping systems such as Auxiliary
Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air,
Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work
item specifications, NAVSEA/Military standards and drawings or
other regulatory body standards such as ABS, Military Sealift
Command, etc. Repair and fabrication include the use of various
shop equipment such as table saws, pipe threading machines, bending
machines (power as well as hand operated), drill presses and
brazing equipment. Additional tasks associated with this position
include blanking and pressure testing of tanks (structural boundary
testing). An Improver is also responsible for providing direction
to helpers as directed by the supervisor. The qualifications and
general capabilities listed below are representative of the
knowledge, skill, and ability desired by the shipyard.
QUALIFICATIONS AND EXPERIENCE1. Must be able to comprehend
instructions and general correspondence.2. Must have a working
knowledge of ship repair terminology and ship compartment naming
convention.3. Must be physically and medically capable to wear all
required personal protective equipment (PPE) required for the job
as prescribed under OSHA standards. PPE includes hard hat, safety
glasses, steel toe shoes, goggles, respirator, safety harness,
safety line, flotation gear, etc.)4. Must be able to effectively
confer job related information verbally and in writing including
providing recommended corrective action.5. Must have working
knowledge of different types of joint fit-ups.6. Must have a
working knowledge of Silver Brazing theory.7. Must be able to
certify in:a. MT Braze (B-1)8. Must be able to interpret
specifications and Navy/MSC/ABS standard items and manuals.9. Must
possess a working knowledge of equipment and work processes used in
marine pipe fabrication, repair, and targeting.10. Must be able to
operate and care for equipment, portable power tools, and hand
tools used to accomplish assigned work.11. Must be able to add,
subtract, multiply, and divide whole numbers, fractions, and
decimals. Must understand the US customary and metric measurement
systems.12. Must have four (4) years of pipefitting experience, two
(2) of which in the maritime repair environment.Required Education,
Experience, & Skills DUTIES AND RESPONSIBILITIES1. Provide
direction to a pipefitter Helper if assigned.2. Arrive at the
designated work site at the assigned time and end the shift as
directed by the schedule and pipe shop supervisor.3. Work shifts
and overtime as assigned.4. Be accountable for completion of daily
work assignments.5. Comply with OSHA standards and BAE best safety
practices.6. Keep your work area clean and safe at all times,
especially at the end of the shift.7. Ensure the work site is ready
for hot work before commencing hot work. Communicate with the Fire
Watch and provide direction as necessary.8. Provide quality work
and Objective Quality Evidence (OQE) as required by the work
specifications or assigned by the supervisor.9. Comply with the
Company's "Non-Discrimination and Anti-Harassment Policy" which
expects that all relationships among persons in the workplace will
be businesslike and free of bias, prejudice, and harassment.10.
Confer with the supervisor and Journeyman to resolve unexpected
events related to your assigned task. Carry out written or oral
instructions.Work Tasks Include:a. Inspect and prepare the area for
work, taking special care if hot work is required. Verify gas free
certifications and tag-outs, before commencing any work.b. Run
lines and leads required to accomplish work. Accomplish drop test
if using flammable or oxygen depleting gases.c. Inspect work for
defects before turning the job over to welders. Correct fit-ups as
required. Confer with supervision or journeyman before correcting
deficiencies.d. Document existing conditions before commencing work
and report conditions to the journeyman or supervisor.e. Remove
damaged pipe in accordance with specifications and as directed by
the journeyman or supervisor.f. Measure or template pipe for
fabrication.g. Blank systems in accordance with standard Item
009-24 or other applicable safety standards.h. Fit up new pipe
using the proper fit up type in accordance with specifications.i.
Ensure a strain free fit-up to pumps or other connecting
equipment.j. Blank tanks and accomplish boundary air tests.k.
Accomplish or verify Lock-out Tag-out requirements before
commencing.Preferred Education, Experience, & Skills PHYSICAL
DEMANDS:The physical demands described here are representative of
those that must be met by an employee to successfully perform the
essential functions of the job. Must be able to tour all vessels,
piers, docks and work sites.While performing the duties of this
job, the employee is regularly required to: stand; walk; use hands
to finger, handle or feel; reach with hands and arms; climb or
balance; stoop, kneel, crouch or crawl; and talk or hear.The
employee is occasionally required to sit.SPECIFIC PHYSICAL
REQUIREMENTS: May be required to demonstrate any or all
requirements.1. Lift/push/pull 50 lbs to 75 lbs on an occasional
basis (0-25% of the day).2. Lift/push/pull up to 20 lbs on a
frequent basis (25-75% of the day).3. Perform prolonged standing
(2-3 hours). Bend, squat crouch, crawl and kneel.4. Climb in a safe
manner (climbing, includes stairs, scaffolding, ladders and
ramps).5. Work at a variety of levels and positions (ex. Waist,
eye, above head).6. Good balance while working on uneven surfaces
and maneuvering obstacles.7. Sufficient handgrip and coordination
to carry and operate tools and equipment.8. Access work areas
through 18" x 36" openings and work in confined spaces for
prolonged periods of time (33-66% of the day).9. Respond to visual,
verbal, and audible sounds/commands.10. Work at heights above 12'
from ladders, scaffolding, and manlifts.11. Fully extend the arm
while reaching overhead, reaching out, reaching to the side and
reaching down.12. Perceive attributes of an object/material such as
size, shape, temperature and texture by means of receptors in the
hands and fingers.13. Turn head from side to side and about on the
vertical axis. Turn body at the waist from side to side and about
the vertical axis.Pay InformationFull-Time Salary Range: $49358 -
$54413Please note: This range is based on our market pay
structures. However, individual salaries are determined by a
variety of factors including, but not limited to: business
considerations, local market conditions, and internal equity, as
well as candidate qualifications, such as skills, education, and
experience. Employee Benefits: At BAE Systems, we support our
employees in all aspects of their life, including their health and
financial well-being. Regular employees scheduled to work 20+ hours
per week are offered: health, dental, and vision insurance; health
savings accounts; a 401(k) savings plan; disability coverage; and
life and accident insurance. We also have an employee assistance
program, a legal plan, and other perks including discounts on
things like home, auto, and pet insurance. Our leave programs
include paid time off, paid holidays, as well as other types of
leave, including paid parental, military, bereavement, and any
applicable federal and state sick leave. Employees may participate
in the company recognition program to receive monetary or
non-monetary recognition awards. Other incentives may be available
based on position level and/or job specifics.About BAE Systems
Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of
BAE Systems plc, an international defense, aerospace and security
company which delivers a full range of products and services for
air, land and naval forces, as well as advanced electronics,
security, information technology solutions and customer support
services. Improving the future and protecting lives is an ambitious
mission, but it's what we do at BAE Systems. Working here means
using your passion and ingenuity where it counts - defending
national security with breakthrough technology, superior products,
and intelligence solutions. As you develop the latest technology
and defend national security, you will continually hone your skills
on a team-making a big impact on a global scale. At BAE Systems,
you'll find a rewarding career that truly makes a difference.The
Platforms & Services (P&S) sector under BAE Systems, Inc does
the big stuff: the armored combat vehicles, naval guns, missile
launchers, and naval ship repair---just to name a few. Our
employees take pride in the work they do and why they do it. They
are on the front lines every day, building our products to protect
the lives of those who serve. We may be biased, but we think
P&S does some of the coolest work around, and we think you will
too.Our Commitment to Diversity, Equity, and Inclusion:At BAE
Systems, we work hard every day to nurture an inclusive culture
where employees are valued and feel like they belong. We are
conscious of the need for all employees to see themselves reflected
at every level of the company and know that in order to unlock the
full potential of our workforce, everyone must feel confident being
their best, most sincere self and be equipped to thrive. We provide
impactful professional development experiences to our employees and
invest in social impact partnerships to uplift communities and
drive purposeful change. Here you will find significant
opportunities to do meaningful work in an environment intentionally
designed to be one where you will learn, grow and belong.
Keywords: Disability Solutions, Calexico , Pipefitter Improver, Other , San Diego, California
Click
here to apply!
|